Showing 1–24 of 316 results

MENELAUS POLISH RTA by GUS

220.00
Menelaus it has a special deck made for easy setup and rich liquid supply achieved by two posts, which are also responsible for holding the cotton in place. The draw is quite rich since cotton is slightly denser compared to the older versions of Phenomenon. The Aiolos chimney has the possibility for fast extraction without presence of hot steam, even with wires out of the suggested setups. Also delivers a dried version of any tobacco liquid, as it incrase its flavors up to 30%. Clearly balanced mtl in terms of air, since there are two leveled holes of 0.75 mm beneath the coil. The capacity of 4 ml is good enough for an mtl RTA. Refilling is very easy from a port on the top of the polycarbonate tank.Turning the steel air ring clockwise, gives the opportunity to micro-adjust the air intake, depending on your tastes. It should be mentioned that the included mouthpiece (Menelaus) is one of the most sought after drip tips in the GUS-MOD series, for its balanced round draw and the increase of the taste to an amazing degree of satisfaction...

MENELAUS RTA MATTE by GUS

220.00
Menelaus it has a special deck made for easy setup and rich liquid supply achieved by two posts, which are also responsible for holding the cotton in place. The draw is quite rich since cotton is slightly denser compared to the older versions of Phenomenon. The Aiolos chimney has the possibility for fast extraction without presence of hot steam, even with wires out of the suggested setups. Also delivers a dried version of any tobacco liquid, as it incrase its flavors up to 30%. Clearly balanced mtl in terms of air, since there are two leveled holes of 0.75 mm beneath the coil. The capacity of 4 ml is good enough for an mtl RTA. Refilling is very easy from a port on the top of the polycarbonate tank.Turning the steel air ring clockwise, gives the opportunity to micro-adjust the air intake, depending on your tastes. It should be mentioned that the included mouthpiece (Menelaus) is one of the most sought after drip tips in the GUS-MOD series, for its balanced round draw and the increase of the taste to an amazing degree of satisfaction...

MENELAUS TANK SET (PMMA – ULTEM)

20.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

MELAMPOUS HARPOON EFS DRIP TIP VF

17.00
Before buying any product, you should know some basic features that will determine the product matching to your preferences. Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time. So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak, as well as some general guidance for you to tell if the product is suitable for your style of vaping. As for the mouthpiece, we need to know the user’s style of draw, weather it is mtl or direct lung. Usually we understand this from its size in general, but the main aspect is the internal diameter of the exit. Height is usually a matter of taste and general appearance but also in differentiation of the draw. Usually it does not change the flow of vapor from mtl to open dl and vice versa. Some models, mainly related to mtl mouthpieces, have been designed for easy use and easy cleaning, always giving priority to the configuration. of steam to the best in terms of taste as a function of the density of the steam that passes through it. The material usually does not change the final result, but contributes a lot to the external appearance – matching of the whole set.

MENELAUS BELL ULTEM TANK

22.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

MENELAUS TOP SLEEVE POLISH

31.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

SIRIUS MINI TANK GUS PHENOMENON POLISH

30.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

MENELAUS SIMPLY TANK SET PMMA GUS POLISH

34.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.  

RBG CHIMNEY GUS POLISH FINISH

37.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

MELAMPOUS HARPOON EFS CHIMNEY

37.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

ONYX 18350 SS HYBRID GUS

100.00
Before buying any product, you should know some basic features that will determine the product matching to your preferences. Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time. So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak, as well as some general guidance for you to tell if the product is suitable for your style of vaping. As for the mechanical mods of our company, they are categorized according to their external diameter and their length, imposed by the corresponding battery. All our devices have short circuit protection, happening through a macro fuse type smd mainly. It is reasonable to pay attention and test fire on an instrument measuring ohms of your resistance before its final placement at the source, in our specific case is our battery case. Keep the tube and its mechanical parts such as switch and top cap in a clean condition, paying attention to thorough cleaning on the threads and parts of the switch because the performance of the mod depends on it. Not only after cleaning will have acquired its original specifications.

HARPOON SS BATTERY CASE 18650 HYBRID SATIN FINISH

100.00
Before buying any product, you should know some basic features that will determine the product matching to your preferences. Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time. So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak, as well as some general guidance for you to tell if the product is suitable for your style of vaping. As for the mechanical mods of our company, they are categorized according to their external diameter and their length, imposed by the corresponding battery. All our devices have short circuit protection, happening through a macro fuse type smd mainly. It is reasonable to pay attention and test fire on an instrument measuring ohms of your resistance before its final placement at the source, in our specific case is our battery case. Keep the tube and its mechanical parts such as switch and top cap in a clean condition, paying attention to thorough cleaning on the threads and parts of the switch because the performance of the mod depends on it. Not only after cleaning will have acquired its original specifications.

BATTERY CASE 18650 WHS KISS FINISH

110.00
Before buying any product, you should know some basic features that will determine the product matching to your preferences. Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time. So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak, as well as some general guidance for you to tell if the product is suitable for your style of vaping. As for the mechanical mods of our company, they are categorized according to their external diameter and their length, imposed by the corresponding battery. All our devices have short circuit protection, happening through a macro fuse type smd mainly. It is reasonable to pay attention and test fire on an instrument measuring ohms of your resistance before its final placement at the source, in our specific case is our battery case. Keep the tube and its mechanical parts such as switch and top cap in a clean condition, paying attention to thorough cleaning on the threads and parts of the switch because the performance of the mod depends on it. Not only after cleaning will have acquired its original specifications.

MR HAT SS V2 DRIP TIP GUS POLISH

17.00
Before buying any product, you should know some basic features that will determine the product matching to your preferences. Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time. So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak, as well as some general guidance for you to tell if the product is suitable for your style of vaping. As for the mouthpiece, we need to know the user’s style of draw, weather it is mtl or direct lung. Usually we understand this from its size in general, but the main aspect is the internal diameter of the exit. Height is usually a matter of taste and general appearance but also in differentiation of the draw. Usually it does not change the flow of vapor from mtl to open dl and vice versa. Some models, mainly related to mtl mouthpieces, have been designed for easy use and easy cleaning, always giving priority to the configuration. of steam to the best in terms of taste as a function of the density of the steam that passes through it. The material usually does not change the final result, but contributes a lot to the external appearance – matching of the whole set.

KISS V 1.A GUS DRIP TIP SS POLISH FINISH

14.00
Before buying any product, you should know some basic features that will determine the product matching to your preferences. Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time. So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak, as well as some general guidance for you to tell if the product is suitable for your style of vaping. As for the mouthpiece, we need to know the user’s style of draw, weather it is mtl or direct lung. Usually we understand this from its size in general, but the main aspect is the internal diameter of the exit. Height is usually a matter of taste and general appearance but also in differentiation of the draw. Usually it does not change the flow of vapor from mtl to open dl and vice versa. Some models, mainly related to mtl mouthpieces, have been designed for easy use and easy cleaning, always giving priority to the configuration. of steam to the best in terms of taste as a function of the density of the steam that passes through it. The material usually does not change the final result, but contributes a lot to the external appearance – matching of the whole set.

PHENOMENON SET ORING FOR V 2UR/S – ETZ

14.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

PHENOMENON ZEST 2*0.8 mm 3P BASE POLISH

130.00
Before buying any product, you should know some basic features that will determine the product matching to your preferences. Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time. So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak, as well as some general guidance for you to tell if the product is suitable for your style of vaping. As far as our atomizers are concerned, they are manufactured with care and detail in Greece. They will be distributed on the market after several tests and after achieving a fairly pleasant result, while tested in our laboratories. They usually consist of the base deck, the chimney and the tank which determines its capacity in ml. In fact, in several series of aromizers there is the possibility of alternative application of a different tank mainly for reasons of appearance but also capacity. Keep your vaporizer clean after each use, it is reasonable to wash it thoroughly for reasons of appearance but mainly for perfect operation in daily use. Also note that in some models of the Phenomenon series there is the possibility of installing an alternative chimney to differentiate the taste and the draw.

MENELAUS TOP CAP MATTE

28.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

MENELAUS TOP SLEEVE MATTE

31.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

SM-D HYBRID NUT 510 ADAPTER SS FOR AIO

19.00
Such beautiful accessory should not be missing from your collection accompanying our device with remarkable functionality and ease of use. This is the new of the hybrid nut 510 adapter in SS for aio from GUS. Coming in matte version and of course the our logo symmetrically around it. Enjoy with the confidence and finesse provided by GUS. Hybrid nut 510 adapter SS for AIO Accompanying the upcoming Aiolos Uncharted RBA, we also designed our version of hybrid nut accepting 510 drip tips. Lately we have come across many devices with similar threads but with minor differences with the original BilletBox, resulting in screwing difficulties or even complete incompatibility. The new hybrid adaptor comes to solve the above issues. With the construction of a "smart" thread it becomes easy to install in most aio devices of the market, with a BB based threading. Easy to install without the need for an extra patent tool, this product is finished in matte for easy cleaning, while the crown logo is placed at a certain height to visually match most boxes. Constructed from 304 L stainless steel, CNC machined and engraved with GUS logo. Aesthetics match our trademark chimney tops, although bigger and wider so there is a firm grip in order to unscrew the nut without the need of an extra tool.

MELAMPOUS HARPOON EFS/CM BASE

130.00
Before buying any product, you should know some basic features that will determine the product matching to your preferences. Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time. So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak, as well as some general guidance for you to tell if the product is suitable for your style of vaping. As far as our atomizers are concerned, they are manufactured with care and detail in Greece. They will be distributed on the market after several tests and after achieving a fairly pleasant result, while tested in our laboratories. They usually consist of the base deck, the chimney and the tank which determines its capacity in ml. In fact, in several series of aromizers there is the possibility of alternative application of a different tank mainly for reasons of appearance but also capacity. Keep your vaporizer clean after each use, it is reasonable to wash it thoroughly for reasons of appearance but mainly for perfect operation in daily use. Also note that in some models of the Phenomenon series there is the possibility of installing an alternative chimney to differentiate the taste and the draw.

MELAMPOUS HARPOON EFS PMMA TANK

19.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

IOU-R CHIMNEY GUS POLISH FINISH

37.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

PHENOMENON LITE PAIR PAWN PMMA TANK

18.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.