MENELAUS RTA MATTE by GUS
Menelaus it has a special deck made for easy setup and rich liquid supply achieved by two posts, which are also responsible for holding the cotton in place. The draw is quite rich since cotton is slightly denser compared to the older versions of Phenomenon. The Aiolos chimney has the possibility for fast extraction without presence of hot steam, even with wires out of the suggested setups. Also delivers a dried version of any tobacco liquid, as it incrase its flavors up to 30%. Clearly balanced mtl in terms of air, since there are two leveled holes of 0.75 mm beneath the coil. The capacity of 4 ml is good enough for an mtl RTA.
Refilling is very easy from a port on the top of the polycarbonate tank.Turning the steel air ring clockwise, gives the opportunity to micro-adjust the air intake, depending on your tastes. It should be mentioned that the included mouthpiece (Menelaus) is one of the most sought after drip tips in the GUS-MOD series, for its balanced round draw and the increase of the taste to an amazing degree of satisfaction...
MENELAUS TANK SET (PMMA – ULTEM)
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS BELL PMMA TANK
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS ORING SET
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS BELL ULTEM TANK
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS SIMPLY TANK SET PMMA GUS POLISH
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS / AIOLOS CHIMNEY POLISH FINISH
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS SIMPLY TANK PMMA GUS
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS AFC RING POLISH
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS TOP CAP MATTE
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS SIMPLY TOP CAP MATTE (PMMA VERSION)
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS AESTHETIC RING (PAIR – PMMA VERSION)
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS TOP SLEEVE POLISH
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS AFC RING MATTE
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS TOP SLEEVE MATTE
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS / AIOLOS CHIMNEY MATTE FINISH
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS SIMPLY TANK SET PMMA GUS MATTE
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS TOP CAP POLISH
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MINIMO 755 2X0.75 (MENELAUS) BASE MATTE FINISH
Before buying any product, you should know some basic features that will determine the product matching to your preferences.
Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time.
So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product
and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak,
as well as some general guidance for you to tell if the product is suitable for your style of vaping.
As far as our atomizers are concerned, they are manufactured with care and detail in Greece.
They will be distributed on the market after several tests and after achieving a fairly pleasant result, while tested in our laboratories.
They usually consist of the base deck, the chimney and the tank which determines its capacity in ml. In fact, in several series of aromizers there is the possibility of alternative application of a different tank mainly for reasons of appearance but also capacity.
Keep your vaporizer clean after each use, it is reasonable to wash it thoroughly for reasons of appearance but mainly for perfect operation in daily use.
Also note that in some models of the Phenomenon series there is the possibility of installing an alternative chimney to differentiate the taste and the draw.
MENELAUS SIMPLY TOP CAP POLISH (PMMA VERSION)
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MINIMO 755 2 X 0.75 (MENELAUS) BASE POLISH FINISH
Before buying any product, you should know some basic features that will determine the product matching to your preferences.
Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time.
So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product
and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak,
as well as some general guidance for you to tell if the product is suitable for your style of vaping.
As far as our atomizers are concerned, they are manufactured with care and detail in Greece.
They will be distributed on the market after several tests and after achieving a fairly pleasant result, while tested in our laboratories.
They usually consist of the base deck, the chimney and the tank which determines its capacity in ml. In fact, in several series of aromizers there is the possibility of alternative application of a different tank mainly for reasons of appearance but also capacity.
Keep your vaporizer clean after each use, it is reasonable to wash it thoroughly for reasons of appearance but mainly for perfect operation in daily use.
Also note that in some models of the Phenomenon series there is the possibility of installing an alternative chimney to differentiate the taste and the draw.
MENELAUS/MINIMO SIMPLY TOP CAP MATTE
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.
MENELAUS/MINIMO SIMPLY TOP CAP POLISH
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point,
such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance.
Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.