Showing 49–60 of 110 results

MENELAUS SIMPLY TOP CAP POLISH (PMMA VERSION)

25.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

PHENOMENON ETZ POLISH FINISH

ETZ is a special deck made for easy setup and rich liquid supply achieved by two posts, which are also responsible for holding the cotton in place. The draw is quite rich since cotton is slightly denser compared to the older versions of Phenomenon. The Tobacco chimney has the possibility for fast extraction without presence of hot steam, even with wires out of the suggested setups. Also delivers a dried version of any tobacco liquid, as it reduces its sweetness up to 30%. Clearly balanced mtl in terms of air, since there are two leveled holes of 0.90 mm beneath the coil. The capacity of 4 ml is good enough for an mtl RTA. Refilling is very easy from a port on the top of the polycarbonate tank.Turning the steel air ring clockwise, gives the opportunity to micro-adjust the air intake, depending on your tastes. It should be mentioned that the included mouthpiece (Caminor) is one of the most sought after drip tips in the GUS-MOD series, for its balanced round draw and the increase of the taste to an amazing degree of satisfaction...

PHENOMENON LITE V 2.2URS ATOMIZER RBA POLISH FINISH

Phenomenon lite v2.2 urs Is the lastest version of Phenomenon lite from Gus-mod with two air holes of 1.00 mm & one air hole 0.80 mm right beneath the coil making the atomiser a comfortable mtl.suitable for any vaper that seeks a tight draw. The Extreme chimney holds the steam and successfully layers it,offering a clear and flavorful vape. Top refilling is easier than ever, as the slot has improved dimensions.The tank is made of durable polycarbonate and the capacity of 4ml is adequate for many hours of vaping pleasure. It is made exclusively in Greece from 304L stainless steel for better conductivity and easier cleaning. The air inlets are sideways from both sides of the deck respectively, and it's ring can be rotated for further adjustment.

MELAMPOUS CHORUS SET TANK POLISH

100.00
Chorus set tank with pmma in matte finish with upper refill. It's easy to fit to the previous models of Phenomenon v 2.2 urs & ETZ. With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.  

IOU-R GUS RTA POLISH

220.00
IOU-R Is the lastest version of Phenomenon from Gus-mod with two air holes of 1.20 mm right beneath the coil making the atomiser a comfortable suitable for any vaper that seeks a open draw. The Iou -r chimney holds the steam and successfully layers it,offering a clear and flavorful vape. Top refilling is easier than ever, as the slot has improved dimensions.The tank is made of durable polycarbonate and the capacity of 4ml is adequate for many hours of vaping pleasure. It is made exclusively in Greece from 304L stainless steel for better conductivity and easier cleaning. The air inlets are sideways from both sides of the deck respectively, and it's ring can be rotated for further adjustment.

ESTIA GUS SLIM TANK PMMA

14.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

MELAMPOUS CHORUS SET ORINGS

14.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

ESTIA ATOMIZER GUS 510 22MM POLISH FINISH

Original price was: €270.00.Current price is: €110.00.
Estia is an atomizer with parallel connection of three coils, in order to vape in low voltage and enjoy a noticeably soft vape. The production started in 2013 and over just one year it was in the top sales in France and Greece. The construction of the deck, given the correct power supply of the three coils, filters the vapor giving the sensation of smoothness in your draw and richness to the overall taste. An atomizer that will not tire you up, even in daily use at home or at work There were several tank kits for the Estia such as Lord, Warrior of light, and Kiss. Also an option for a 4 ml tank was available, the so-called "fatty" in the respective metal finishes, but also in transparent polycarbonate, with variations of top filling, bell cap, or straight with filling from below. Have fun. GUS - Team.

MOMENTOUS V1 – UNFOLLOW V2 TANK PMMA

17.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank - base - chimney - orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

MINIMO 755 2 X 0.75 (MENELAUS) BASE POLISH FINISH

150.00
Before buying any product, you should know some basic features that will determine the product matching to your preferences. Unfortunately it is not always easy to have a complete preview of the product because it is usually difficult for buyers to do a test instantaneously or over time. So we rely on feedback from reviewers and our beta testers, and also on the user experience of customers and friends who have bought this product and have formed an opinion that we use as a type of consulting. Then we can determine specifically what it is capable of offering at its peak, as well as some general guidance for you to tell if the product is suitable for your style of vaping. As far as our atomizers are concerned, they are manufactured with care and detail in Greece. They will be distributed on the market after several tests and after achieving a fairly pleasant result, while tested in our laboratories. They usually consist of the base deck, the chimney and the tank which determines its capacity in ml. In fact, in several series of aromizers there is the possibility of alternative application of a different tank mainly for reasons of appearance but also capacity. Keep your vaporizer clean after each use, it is reasonable to wash it thoroughly for reasons of appearance but mainly for perfect operation in daily use. Also note that in some models of the Phenomenon series there is the possibility of installing an alternative chimney to differentiate the taste and the draw.

PHENOMENON TOP SLEEVE POLISH (v 2.2urs)

25.00
With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.

IOU-R TANK SET MATTE

100.00
Iou-r set tank with pmma in matte finish with upper refill. It's easy to fit to the previous models of Phenomenon v 2.2 urs & ETZ. With time and daily use an atomizer will eventually need replacement of any damaged parts at some point, such as tank – base – chimney – orings, or simply placing a different part on your atomizer in order to achieve a different result in appearance and performance. Usually parts of each atomizer are included in the same tab with the specific atomizer, for faster and safer choice of the correct spare part.